Entertainment

Correio newspaper | 4 tips for using wood in residential architecture

[ad_1]

YOUR HOME

4 tips for using wood in residential architecture

See how to apply this type of material to floors, doors, panels and decks

  • Photo by the author Portal Edicase

Published on October 23, 2024 at 4:30 pm

Wooden projects can balance tradition, elegance and sustainability (Project: Sabella Arquitetura | Image: Manuel Sá)

Wooden projects can balance tradition, elegance and sustainability Credit: Project: Sabella Arquitetura | Image: Manuel Sá

Each type of wood meets different aesthetic and functional demands, whether in floors, doors or external decks, requiring well-founded decisions and taking environmental impact into account. According to Frederico Sabella, architect at Sabella Arquitetura, the choice varies depending on each demand, accompanied by a careful analysis of the conditions and specificities of the material.

In this assessment, the professional considers aspects such as wear resistance, climatic variations and aesthetic factors as determinants to ensure the conservation and good performance of each piece. “Without a doubt, correct execution is capable of enhancing the architectural project, in addition to providing lasting, pleasant environments in harmony with nature”, he reveals.

Since ancient civilizations, wood has been one of humanity’s favorite materials for construction and decoration. However, Frederico Sabella reinforces that management requires commitment to sustainable crops. “For ethical and environmental awareness reasons, we only work with certified products, the result of reforestation practices and originating in Brazil”, he explains.

The architect also adds that ecological wood, as it is also known, reduces deforestation through controlled and sustainable management, preventing the sector from contributing to the worsening of climate change, a central issue to be faced across the planet.

Below, check out some recommendations and make the right choice!

1. Wood for flooring

When choosing wood for the floor, it is important to take into account the style of architecture (Project: Sabella Arquitetura | Image: Manuel Sá)

When choosing wood for the floor, it is important to take into account the style of architecture. Credit: Project: Sabella Arquitetura | Image: Manuel Sá

According to Frederico Sabella, the evaluation of wooden floors takes into account criteria such as the style of architecture planned for the project, resistance according to the location’s needs and the cost-benefit factor. Among the typologies, he discusses cumaru, with its dark tone, oak and sucupira, both with lighter variations. “I consider that all three have an intermediate price”, he explains.

Among the “noble” types, the Jatobá, a tree known for its ability to live for around a hundred years, is acclaimed for its warm hue and natural shine. “However, these aspects reflect on the high price of wood”, highlights the architect.

Another possibility listed is demolition wood, which, despite not having the same resistance compared to previous options, appears as an interesting alternative for flooring due to its sustainable nature and more attractive cost.

2. Wooden panels

Wooden panels bring texture and elegance to the environment (Project: Sabella Arquitetura | Image: Manuel Sá)

Wooden panels bring texture and elegance to the environment Credit: Project: Sabella Arquitetura | Image: Manuel Sá

Wooden panels are often used in wall coverings, cabinets and partitions, bringing texture and elegance. Among the possibilities are freijó, known for its light and soft color that results in a modern look, while cedar, in a warmer variation.

“We can also consider MDF”, says Frederico Sabella, who suggests paying attention to the dimensional stability of the pieces used in the project, as variations in temperature and humidity can cause expansion.

Slatted wood, widely used in interior or exterior enclosures, involves spacing between pieces, resulting in a vertical rhythm that complements, for example, a sequence of glass planes. It is generally used on the floor and ceiling and without intermediate uprights.

“In addition to adding texture to the architectural ensemble, the slats contrast with smooth coverings such as floors and stones. As for the tone, we sought to harmonize the set with the use of warmer woods to balance the serious appearance of the exposed concrete”, he adds.

3. Wooden doors

The freijó wood applied to the pivoting door offers durability and sophistication (Project: Sabella Arquitetura | Image: Manuel Sá)

The freijó wood applied to the pivoting door offers durability and sophistication Credit: Project: Sabella Arquitetura | Image: Manuel Sá

For the doors to have mechanical resistance, as well as aspects in line with the architectural project, wood such as mahogany, with its reddish tone and properties that respond to climatic variations; cumaru, recognized for its resistance, and pink peroba are clear choices.

Thinking about internal spaces, cedar, freijó and tauari are more popular, especially in smooth finishes or carvings that outline sophisticated features. “Our technical opinion takes into account particular issues such as acoustic insulation”, reports Frederico Sabella.

For high-end projects, the specialist always considers solid wood derived from reforestation plantations, even though this choice implies a higher value. However, it is also feasible to select models with excellent aesthetic results achieved by MDF with natural veneer or laminates that imitate the appearance of solid wood. “Although it has lower durability, its price is more competitive when we need to combine quality within a leaner budget”, he adds.

4. Wooden outdoor deck

This cumaru wooden deck, around the infinity pool, guarantees stability and integrates the space with the surrounding nature (Project: Sabella Arquitetura | Image: Manuel Sá)

This cumaru wooden deck, around the infinity pool, guarantees stability and integrates the space with the surrounding nature (Project: Sabella Arquitetura | Image: Manuel Sá) Credit:

For an external deck, the wood must be, without fail, resistant to humidity and variations resulting from natural elements. To this end, ipê, cumaru and garapa are the popular typologies.

However, the Sabella Arquitetura project team highlights the preference for teak, a naval species used in the construction of boats due to its high density and resistance. For its construction, the rulers usually have a thickness between 22 and 45 mm and a layout of pieces with a width of 5 to 7 cm for a more elegant and delicate result.

[ad_2]

Source link

Michelle Williams

I'm Michelle Williams, an enthusiastic author specializing in captivating entertainment content on Rwcglobally.com. With a passion for storytelling and a keen eye for the latest trends, I aim to engage readers with compelling narratives that reflect the dynamic landscape of the entertainment industry. Join me on Rwcglobally.com to explore the world of film, television, music, and more, as we uncover the stories that define contemporary culture.

Post Comment